Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Phoenix, AZ

Graffiti Removal for Concrete in Phoenix, AZ

Pressure wash with a surface cleaner for concrete. Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface. Typical cost $200-$800.

Graffiti Removal for Concrete is one of the jobs we do most often in Phoenix, AZ. Typical jobs cost $200-$800, and you approve the price before we begin. For concrete, that means pressure wash with a surface cleaner.

Method and pressure

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

Cleaning concrete safely

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Signs you need graffiti removal for concrete

  • Spray paint or marker on walls, fences or signs
  • Ghost marks left from earlier removal

Where the grime comes from

  • Vandalism
  • Shadowing left by paint that soaked into porous masonry

Safe steps for homeowners

  • Photograph it for your records or police report first
  • Don't paint over it with a color that won't match
  • Ask about anti-graffiti coatings for repeat targets

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Driving paint deeper into porous masonry
  • Damaging the surface with the wrong solvent
  • Leaving a 'clean' patch that stands out

What happens on the day

  1. Identify the paint and the surface
  2. Test a remover on a small area
  3. Apply remover and let it dwell
  4. Rinse with pressure suited to the surface
  5. Treat shadowing or apply a protective coating

Typical graffiti removal for concrete prices

$200-$800Typical range for a typical wall or tag area
1-3 hoursTypical time on site
As needed; fast removal discourages repeat taggingRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Serving Phoenix, AZ and nearby towns

Commercial properties in Arizona usually focus on dust, gum and oil on sidewalks, entrances and parking areas, and on keeping storefront glass free of hard-water spots.

Some cities in Arizona limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

Besides Phoenix (ZIP codes 85001, 85002, 85003, 85004, 85005 and more), we handle graffiti removal for concrete in Tempe Junction (7.9 mi), Guadalupe (8.4 mi), Glendale (9 mi) and Paradise Valley (9.5 mi). Call (877) 658-5887 for a free quote in Phoenix.

Graffiti Removal for Concrete: frequently asked questions

How much does graffiti removal for concrete cost in Phoenix, AZ?

Graffiti Removal for Concrete typically costs $200-$800 for a typical wall or tag area, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for graffiti removal for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is graffiti removal for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule graffiti removal for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Phoenix, AZ

Pre-Paint Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $250-$600

HOA & Apartment Pressure Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $800-$5,000

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Driveway Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$400

Paver Cleaning & Sealing

Paver cleaning, re-sanding with polymeric sand and sealing to lock joints, deter weeds and bring back color.

Typical $600-$1,800

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Efflorescence Removal

Removing white, chalky salt deposits from brick, pavers, concrete and stone.

Typical $200-$600

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Pool Deck Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $200-$500

House Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$700

Soft Washing for Cedar Shake Roofs

Soft wash. Cedar shakes grow moss and lichen and turn gray as the wood weathers.

Typical $300-$800

Ready for a cleaner home or business?

Get a free pressure washing quote in Phoenix, AZ. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote